How many of you are going through Linksys router blinking orange or flashing orange problem right now?
If you’re reading this article, I am sure; you will be also dealing with blinking orange light problem. that’s why you are reading this article to fix this issue.
If I am correct?
You are at right place to find the solution for Linksys router blinking orange problem.
Before I will share the instructions about how to fix Linksys router is blinking orange yellow light. Let me share some information about the root cause of this problem.
As we all know, blinking internet light means no internet connectivity. In the easy language, your router is not getting internet from the modem.
Reason Linksys Router Blinking Orange-
This problem usually comes because of few common reasons.
- Internet service provider (ISP) issue.
- Router setup problem.
- Ip address confliction issue.
- Linksys router firmware has been outdated.
- Configuration problem.
These are five most common reason behind Linksys router has flashing orange light. So let me go ahead and share the instructions for how to fix this issue.
How to fix Linksys router blinking orange or flashing orange problem –
Here I am going to share the instructions about how to fix Linksys router blinking orange light. You may go ahead and follow the instructions to fix the problem.
Internet Service Provider (ISP) Issue-
Before blaming the Linksys router for the yellow light, first you should check the internet status on your modem.
Make sure you are getting internet on your modem.
To check the internet status, you may look on your modem. If you can see green or blue WAN light, then it’s a problem from your router. in that situation, you should proceed to next step.
But if you can see orange or yellow light on your modem, then it’s a problem from your isp. In this situation, you have to call your isp and ask them for the solution.
Also, you may check the internet connection, by connecting the modem to the computer directly by following the instructions given below.
- Power off your modem and router.
- Unplug router and connect your modem directly to your pc via ethernet cable.
- Now power on the modem only. Do not turn on the Linksys router.
- Let’s try to access the internet on your pc. Let’s see if you can access the internet or not.
Router setup Problem-
You should not forget to check the connection between router and modem.
So double check the connection between router and modem. your modem should be connected from internet port of the router via ethernet cable.
Also not forget to check the cable? The ethernet cable should not be broken, to ensure the cable health status. You should remove the existing the cable from your router and modem, and try to connect your router with the modem using a new or any extra ethernet cable.
After replacing the cable, if the router will start giving you solid green light, then it was a problem from your cable. You need to through your old cable. Let it be connected with new cable.
But after changing the cable, if you can still see the blinking orange light on your Linksys router, then problem is related to router.
In that situation, you need to jump to the next step.
Power cycle the devices-
Sometimes, router starts blinking orange after the power outage. When you get the power in your home and you try to turn on your devices. Your modem and router are not able to identify each other.
That’s why your Linksys router doesn’t get internet and as a result it starts blinking orange or shows you solid orange light.
To get your devices recognized, you need to power cycle the Linksys router, modem and pc one by one in the sequence.
After powering on the devices, you need to wait for 1 minute. So they can detect the internet connection.
Router configuration problem-
When you setup Linksys router into your network, you have to configure the internet settings according to the isp. Another than, your router will not able to get connected to the internet.
If you have DHCP internet connection type from your isp. Then you don’t have to do anything, your router will automatically detect the settings.
But somehow, if you got PPPOE connect or Static IP connection from your ISP. Then you have to fill all information correctly.
If you will fill any wrong information, your Linksys router will never get connected to the ISP. So make sure you are typing correct information.
If you don’t know the ISP settings or have any doubt on ISP settings detail? You may call your isp and confirm the details with them.
Ip conflict issue –
Ip conflict issue is one of the most common reason behind Linksys router blinking orange. if your modem and router’s ip address belongs to the same class.
They will conflict with each other. Due to that, you will have Linksys router Flashing orange light problem.
In this situation, you should connect your change the ip address of your router.
After changing the router’s ip address. you should try to reboot your router and modem again.
Firmware Is Outdated-
Talking about the another reason behind Linksys router flashing orange light, if you have an old Linksys router and you have not updated it since a long time.
This problem may be related to router firmware. In this situation, you should check for the firmware update first.
If you find any kind of update available. You need to go ahead and update your router immediately.
To know about firmware update, you may visit:
Factory restores the Linksys router-
After performing all these steps, if your Linksys router is not working yet? in this case, you need to reset your Linksys router and reconfigure it.
To reset the Linksys router, you need to take a pen or pin, and then press and hold the reset button on your router for one minute by the help it.
Once you will release the reset button. you need to power off your router for one minute and then power it back on.
After power it back on, you need to configure your router manually.
Note- Do not reset your router for multiple times, it may damage your router. so try it once only. If it is not still not working, take a advice from an expert to troubleshoot the router.
I hope now your Linksys router will be start working fine. somehow if you are still getting blinking orange or solid orange light.
In that case, it may be hardware problem and you have to replace the router.
But before replacing the router, you should contact to the Linksys router support once to check the linksys router health.
Thanks for reading the blog.